Creality 3D-Drucker Sermoon M1

The Sermoon M1 is one of the most powerful printers Creality has created. It´s a industrial grade, high temperature printer with a lot of useful functions.x

Highlights

• Double casing for best thermal insulation
• Water and air-cooled nozzles
• Dual temperature control system, real time monitoring of temperature
• Uniform results thanks to hot-air circulation
• High power heat bed that reaches 150° in just 3 minutes
• Power off delay
• Constant temperature in filament chamber
• Case cooling system
• Large display with intuitive GUI

Double casing for best thermal insulation

The whole printer has a double-layer casing which is very good for the thermal insulation effect.

High power heat bed

The heat bed is made from 6 mm aluminum. It can reach 150°C in just 3 minutes. The build platform is made crystal silicon glass with a nano-coating.

Water cooling

The cooling system works with both air and water. This provides the optimal cooling effect and makes sure that the temperature around the nozzle keeps at a steady temperature.

Temperature system

In the compartment for the filament the relative air humidity can be kept at 10-25% - this will ensure that the filament won’t be subjected to the damp air, which can result in failed prints and brittle filament.

Dual heating systems

The printer has a heated build chamber that can be set to 90°C. Thanks to infrared radiation and hot air circulation the heated chamber reaches temperature quick and provides the chamber with a “soft” heat that reaches every corner.

Power off delay

If there should be a power outage during printing the nozzle will automatically return to the X-axis zero before turning off the machine.

Case cooling

When printing with high-temperature materials, the top door cooling system can be activated. This system cools down the air between the two shells. This improves stability and service life of the equipment.